In case your current or previous life involved regulation enforcement or army service, likelihood is you realize Safariland. You’ve virtually definitely been issued some of their package, possible in the form of obligation holsters or body armor.
- 1 The Safariland Group
- 2 Half 1: Safariland Acoustics Lab.
- 3 Part 2: Safariland Armor Ballistics Lab.
- 4 Safariland Saves Club
- 5 Half 3: Obligation Gear Techniques.
- 6 NIJ Armor Scores
The Safariland Group
Safariland has been around for over five many years and has developed into the source of excess of holsters over the previous few years. A number of manufacturers at the moment are part of The Safariland Group. The group writ giant could be very revolutionary and pays a lot attention to what finish users say about numerous products as a way to enhance them. They’re all too aware their clients go into hurt’s method as a vocation and so rely on Safariland merchandise for all times and limb. Maybe greatest recognized amongst their manufacturers are in fact Safariland, but in addition Bianchi, PROTECH, Hatch, TCI, and Rogers, but there are various others producing wonderful merchandise in their own specific “battlespace” See under.
I’ve used Safariland gear in a single type or one other since I was a young Explorer in my teens, which signifies that I’ve had had their package on me now for more than half of my life. The holster I’m using now’s Safariland, as is my present issued body armor. I’ve never been 10-8 [on duty/in service] with another obligation holster. For my part, they’re simply the perfect obligation gear obtainable.
Members of the Safariland Saves Club would little question agree.
The Safariland Saves Club is an inventory of those whose lives have been saved by Safariland armor, helmets, or ballistic shields. Since this image was taken that quantity has increased to greater than 2,050. Study more: Safariland Saves on-line.
I’ve been fortunate to take care of a superb relationship with the individuals at Safariland since I began my social media page and the Fifty Shades of FDE blog. They’ve sent me products to evaluation and check out through the years. They stand behind their merchandise and are all the time popping out with new options that proceed to impress me.
Lately Safariland invited to stop by their Ontario facility for a tour, and a number of weeks later was capable of take them up on their supply. It was an awesome expertise that helped me higher respect all of the work that goes into the merchandise I exploit day by day.
Upon arrival, I met up with the Safariland group and they offered an summary of what was forward. That specific location is a singular facility with both an Acoustics and Ballistics Lab in the same constructing.
The tour was broken down in three elements:
•1. The Acoustics Lab
•2. The Armor Ballistics Lab
•3. The Obligation Gear Techniques area
Half 1: Safariland Acoustics Lab.
Communications and Ear Professional
Most of you’re accustomed to TCI and their Liberator headsets which are in service with SWAT officers everywhere in the nation, as well as our service members abroad. I’ve the DEHP and Liberator HP headsets myself and their sound quality and listening to safety is outstanding. Safariland acquired Tactical Command Industries (TCI) in 2015 and transitioned it into their Ontario facility. Similar great product line, now provided beneath the Safariland model identify.
A Liberator Headset undergoes testing.
The Chief Engineer of the Communications division showed me what every single headset goes by way of in the acoustics lab for calibration earlier than it’s accepted to be shipped out.
The particular headset I was proven was in for service getting examined and calibrated earlier than heading again to the client. The acoustics check befell inside an enormous black field where the headset was placed on a stand with microphones representing each ear and surrounded with audio system and foam lining on the interior walls of the box.
Safariland calibrates each piece of communication gear before it ships.
The door was shut and the check began to verify the Noise Discount Score or NRR of each ear. There wasn’t much variance on the conclusion of the testing and exceeded the advertised NRR score. The headset is now good to go back into service.
Next to the acoustics lab is the assembly flooring for all of their digital headsets. Every part within the communications product line is handmade proper on this room with each element made in the USA.
Safariland Comms package is assembled by hand right here of all made in the USA elements.
There’s all the time room for improvement and the Safariland engineers take feedback from their clients to adapt and conform to the needs of those who use their headsets in the subject.
One of the present efforts underway in The Safariland Group’s acoustic lab is a drive to increase battery life.
The staff is presently engaged on growing the battery life of their headsets and making them more adaptable to helmet mounting options.
To buy Safariland.
Part 2: Safariland Armor Ballistics Lab.
PPE – “bulletproof vests”, helmets, and ballistic shields
The Armor Ballistics Lab is the home of all of the Research and Improvement that goes into smooth, exhausting and stab armor techniques. There are two ranges that mimic NIJ requirements.
Staring down the barrel. Don’t fear, all security precautions have been used to take this image!
Vary 1 is for Delicate Armor testing towards Pistol and Fragmentation threats.
Vary 2 is for Onerous Armor Plate testing towards Rifle threats.
Ammunition calibers and varieties available for ballistic testing: they’ve just about every thing obtainable. About the only factor missing are double cartridges for a Callahan thorough gauge.
Reloading gear is used for higher control over projectile velocity.
The cupboards alongside the walls are filled with manufacturing unit ammunition from throughout, which is used within the exams. Additionally they reload ammunition to regulate the speed of the rounds fired.
The aim of those exams contained in the Ballistics Lab is to see if there’s any penetration and to measure back face deformation. The objective is to haven’t any penetration (obviously, holes are not any good) and back face deformation underneath the NIJ standards depending on the level of safety of the examined armor.
The Safariland “Tube Gun” used for ballistic testing.
Most exams are accomplished with a tube gun that can be positioned at a selected distance and is electronically fired by way of a button outdoors of the control room within the lab.
Numerous barrels for the tube gun.
Armor pieces are held towards a clay slab by way of straps and positioned in front of the gun. After each check, the armor is eliminated and checked for penetration and the impacts in the clay are measured for again face deformation.
Glock 21 was the check gun on the day I visited the power.
Additionally they use actual firearms to do different varieties of testing, which is what I received to witness and it was undoubtedly extra fun to observe than someone urgent a button to remotely hearth the spherical. The check that that they had ready for me concerned one in every of their technicians firing a Glock 21 twice at level clean range into certainly one of their Summit Degree IIIA panels. One of the technicians took my telephone to get some video of the first shot subsequent to the shooter since I needed to watch from the management room behind glass.
The shot was fired, then the weapon cleared. All of us went in for a glance and you possibly can see the round slide down behind the duvet from the place it had hit.
That is learn how to catch a .45 ACP slug!
We went back outdoors and they shot it a second time in a special position. That round caught in the vest the place it had impacted, identical to you see within the films.The vest was taken down so we might take a look at the back face deformation. The maximum distance for this degree of protection is 44mm. The primary shot was measured at 27mm and second at 24mm, nicely under the max.
Shot number one. Notice the slug just beneath the outer cover.
Backface deformation within the clay from the primary shot.
Shot quantity two.
Vest flipped over. No penetration with the backface deformation in the clay slab.
Next, the vest was inspected to verify for any penetration. There wasn’t any so the outer cover was minimize off for a look inside. Both slugs have been inspected and when taking a better look, you would see striations from the fabric of the vest the place they made contact and slowed the rounds right down to cease them. They have been shaped into copper mushrooms and have been nonetheless heat to the contact.
Chopping back the layers to get a better look.
When you look intently you possibly can see the striations from the ballistic fibers on the flattened bullet.
Safariland is the one armor producer to have a full ballistics lab of their facility for in-house testing. Protecting the officer is paramount in their product improvement. They do these lab exams to ensure their products meet and exceed NIJ standards even earlier than they ship them to be tested by an unbiased lab for certification. Certifications are essential and nice on paper, however it doesn’t promote confidence to these of us a lot once we are dependent on them as safety and confidence are what they need to promote. The more assured the top consumer is with a product, the extra they might need to wear it.
This vest took plenty of hits outdoors the lab. Some real-world testing.
To determine that degree of confidence for the staff and these of their clients, they’ve a technician that takes armor out to the desert and shoots them with a variety of firearms and ammunition. He additionally takes the armor on the street and does reside demonstrations at regulation enforcement company ranges.
I used to be additionally given the opportunity to try their stab- resistant or Degree I armor. As an alternative of making an attempt to catch and stop a bullet like Degree II and IIIA smooth armor do, they deflect stab threats away from the physique. To check these vests there’s a stab chamber which drops spikes, knives, and other stab threats.
A check spike used for testing stab-resistant armor.
The workforce is all the time doing research into new materials to maximize protection, reduce weaknesses, and at the similar time make armor extra snug for many who should put on a vest for every and every shift. They understand that the extra snug their armor is, the extra possible it’ll be worn.
Safariland gives courses to teach LEOs about physique armor several occasions a yr. This consists of ballistic testing in the lab. Having a better understanding of how physique armor works will assist those who wear it utilize their protective gear to its full potential, as well as recognize the work behind all of it.
To buy Safariland.
Safariland Saves Club
Something that’s distinctive at Safariland is their SAVES CLUB that began in the ’70s and continues right now. The SAVES CLUB honors those who, through the line of obligation, skilled a life-threatening incident the place Safariland armor or gear saved their life. The quantity at the time of this writing was 2034. The corporate motto is: “Together, We Save Lives.” It is extremely necessary to them and it’s a large part of the tradition.
Every year at SHOT Show, they invite members of the SAVES CLUB to discuss their incident, arguably one among their worst days on the job, and how they survived it sporting physique armor from The Safariland Group.
Half 3: Obligation Gear Techniques.
Holsters, belts, and different requirements
Safariland Obligation Holsters have a fame of being the most effective out there. They have very effective retention techniques that, with apply, are very fast to deploy. Know-how has improved through the years because the introduction within the 1980s of the primary Degree III retention holster, the Safariland 070.
Prototype assembly line.
At the moment the state-of-the-art Safariland holster product, perhaps any holster product, is their ALS (Automated Locking System) retention. The ALS will fit a wide selection of pistol varieties. Their 7TS collection options extremely regarded development as nicely. These are a few of the most sturdy holsters obtainable and are capable of endure a critical beating to guard the pistols secured inside.
The current focus of the Obligation Gear Staff is on expanding the 7TS collection with their Purple Dot Sights (RDS) line of holsters, obligation holsters with smaller profile WMLs and extra hid carry holsters.
There are at present many offerings for many who conceal carry. They’re including to that lineup embrace more makes and models. Depending on the top consumer’s requirements and preferences, the GLS line of holsters presents what many different holsters don’t: lively retention.
From leather-based to injection molded holsters, Safariland gives one thing for everyone.
Before Safariland took me on their tour, I’d thought that the obligation holsters have been all made by a single machine that took within the materials in one end and extruded accomplished holsters out the other. I couldn’t have been extra improper. I was taken out to the manufacturing unit flooring where the obligation holsters are made. Mind you, this isn’t the 7TS collection, which is a a lot easier course of by way of injection molding. These are the 6000 collection line of bombproof holsters and they are principally handmade down an extended meeting line.
Firstly, there are the sheets of Boltaron which are then reduce to shape, hardware added, then positioned into metallic molds particular to every handgun model; put by means of a warmth press and deburring to remove the sharp edges from the cuts. Each single holster is then fit checked for full functionality. All the process from starting to finish for a single holster is round twenty minutes.
Going by way of each and every station alongside the meeting line gave me an entire new appreciation for all of the onerous work that goes into every and every holster made on this trend. There are some stations that have a particularly small tolerance for error that if too little or too much materials was taken off, the whole holster wouldn’t work in any respect. That requires lots of attention to detail which is mastered by their staff.
I not take a look at my Safariland obligation holsters the same method.
Everyone I met throughout my tour at Safariland was very keen about what they do. There is a palpable sense of delight of their merchandise — they know who their clients are. High quality is built into every thing they make and they are persistently innovating.
I had a good time attending to see how things I exploit each day are made and the place all of it comes from.
Because of the Safariland group for inviting me to such an academic and gratifying visit!
Visit www.safariland.com for extra info.
Where to buy Safariland
Buy Safariland or not, as you choose and after due diligence. When you do buy some, nevertheless, please do us a strong and achieve this by way of certainly one of our links.
NIJ Armor Scores
Would you wish to know extra?
Included among the many latter are:
Forensics Source http://www.safariland.com/identicator/products/forensics/
Mustang Survival https://www.mustangsurvival.com/
Lightning Powder http://www.safariland.com/lightning-powder/products/forensics/
NIK Public Security http://www.safariland.com/nik-public-safety/products/forensics/
Defense Know-how http://www.defense-technology.com/
Like what you read here? Contemplate backing us on Patreon.
You’ll be mechanically enrolled into the Tactical Consumers Club, thus getting dozens of low cost codes to high-end corporations within the tactical/firearm/outside area, and you’ll earn the best to wear the House Morningwood sigil.
⚠️ Some hyperlinks on this article might include affiliate links. In the event you use them to make a purchase order, we’ll obtain a small commission at no further value to you. It’s just one solution to Again the Bang. #backthebang